Adequate supply and quality assurance
Rich industry experience
Rest assured product
Customer satisfaction
2021-4-15
0

Specifications and Dimensions
● Specification: 200g/m 2 -1200g/m 2 Size: Width 1200mm, 1500mm Length: 100m/roll, 50m/roll
● Various colors can be produced according to user requirements
Product Overview Product FeaturesThis product is a green and environmentally friendly product, non-toxic, odorless, and pollution-free. All meet the requirements of GB/T17219-1998 "Safety Evaluation Standards for Drinking Water Transmission and Distribution Equipment and Protective Materials". ● Due to the addition of anti-aging agent, the product has good anti-aging, anti-oxidation, corrosion resistance characteristics, good flexibility, easy bending, non breaking, tensile and anti perforation properties, and meets the requirements of GB18173.1-2012 Polymer Waterproof Materials - Part of Sheet Materials. It can have the same life as building structures. Polyethylene is not rotten and weathered when buried in sand. The test proves that there is no crack at low temperature -40C, and no deformation at high temperature+100C. Construction can be carried out on damp substrates, as long as there is no visible water on the substrate. After the heavy rain stops, the accumulated water can be swept away and construction can be carried out immediately, which is conducive to rushing the construction period. Good flexibility, easy to bend, can be folded freely, and easy to operate. The kitchen and bathroom, swimming pool, and water pool are waterproof. The corners of the interior and exterior, as well as the pipe roots, do not need to have octagonal angles or curved shapes, and can be constructed at right angles to avoid the phenomenon of damaging the waterproof membrane when tiling in the next process, ensuring that the secondary water seal does not leak. Fast construction speed, high efficiency, no need to do roughening or interface treatment for kitchen and bathroom, swimming pool, and pool walls. Directly pasting ceramic tiles on the roll material is both labor-saving and effortless. The polymer cement binder used in conjunction with the roll material is a green and environmentally friendly product. Its main raw materials are the matching adhesive and cement produced by our company, which are mixed into a paste. The bonding material not only has good bonding performance, but also acts as a waterproof layer, which can seal the rough joint holes of the base layer and play a water blocking role. It has very loose requirements for the base layer and can also play a leveling role. Strong anti puncture performance, suitable for waterproofing various green planting surfaces, good anti perforation performance, can play a role in preventing root punctures, and the waterproof effect is very obvious. |
Scope of Application
Construction Procedure: Acceptance of Leveling Layer - → Cleaning of Base Layer -+Preparation of Cement Adhesive -+Application of Additional Layer 1+Base Layer Construction - Protective Layer+Maintenance
Before bonding, pre lay and align the roll material, then fold and roll up both ends of the roll material. Pour the prepared cement adhesive into the base layer and use a scraper to evenly scrape it open. Then push the roll material forward and promptly use the scraper to remove excess adhesive left inside the roll material. The bonding rate between the coil and the leveling layer is ≥ 85%
● Seam method:
(1) Roof waterproof connection construction: The vapor barrier layer, waterproof layer, and additional layer are all connected by lap joint method, bonded with cement adhesive, with a width of 10cm. The joint of the additional layer is staggered with the joint of the waterproof layer by more than 5cm.
(2) Construction of basement waterproof joints: The joint method adopts 10-15cm overlapping cover strips, and the cover strips are bonded with polymer joint adhesive.
(3) The overlap width of waterproof membrane should be 8-10cm for the long side and 10-15cm for the short side. The joints between adjacent short sides should be staggered by more than 10cm, and the angle between the wall and the ground should be at least 30cm.
● Protective layer: After the roll material is laid and glued, a 1-2.5 cement mortar protective layer with a thickness of 2cm should be applied on the waterproof layer in two stages. The joints between the two layers must be staggered by more than 20cm, and the protective layer should be flat and watered for curing.