Product Overview

       Self-adhesive polymer modified asphalt polyester tire waterproofing membrane is made of filament polyester felt as the base, with tackifier polymer modified asphalt as the dip coating material. The upper surface is covered with polyethylene film, fine sand, shale, aluminum foil, or isolation film as the isolation layer, and the lower surface is coated with silicone isolation film as the anti-adhesive layer.

Product Features

Cold construction: no use of open flames, no use of adhesives, energy-saving, environmentally friendly, low-carbon, and economical;

Excellent adhesion performance: Excellent adhesion performance with the base layer, avoiding the occurrence of water seepage. It has self-healing function, and the joint can bond with the roll material for the same lifespan;

High tensile strength, high elongation, strong resistance to puncture and corrosion;

Excellent low-temperature performance;

Wide width roll material has less construction loss and is more convenient for construction. Key points for material selection: Type 1 products are suitable for underground and roof waterproofing in general and mid-range construction projects; Type II products have greater tensile strength, higher elongation, and better low-temperature flexibility, making them particularly suitable for underground construction, roofing engineering, and open cut subway stations. When used as the main material for underground engineering, the thickness of the single-layer roll material should be ≥ 3mm; the thickness of the double-layer roll material should be ≥ 3mm+3mmb

Waterproofing of non exposed roofs and underground works;

Waterproofing of municipal engineering such as water channels and swimming pools;

Waterproofing of subway engineering using open cut method:

Especially suitable for waterproofing projects that cannot use open flames.

Excellent low-temperature performance is more suitable for use in cold regions.

description

Products are classified into Type I and Type II based on their performance.

The product is divided into polyethylene film (PE), fine sand (S), and non film double-sided self-adhesive (D) according to the surface material

總計0頁 [ ]上一頁 下一頁0page